Does anyone know what the target balancing on the 3 wheels is? Seems like having it spread evenly across all 3 wheels would be best. But I'm not an automotive engineer....
I asked this question before I saw the videos showing the first Aptera's cornering performance which looks excellent.
But I was thinking that if the nominal wheel load is equal for all 3 it would be 2/3 (67.6667%) up front and 1/3 in the back. Which is about what you are all saying.
They were aiming at a 70% front wheel weight bias.
I belive Bruce is right
I asked this question before I saw the videos showing the first Aptera's cornering performance which looks excellent.
But I was thinking that if the nominal wheel load is equal for all 3 it would be 2/3 (67.6667%) up front and 1/3 in the back. Which is about what you are all saying.
Thanks.
I assume you were looking at old 2e video, which us a different vehicle
Only FWD
No in wheel motors
Motor under hood
91”W ai believe
https://newatlas.com/aptera-2e-specification-released/10903/
New Aotera is suppise to much better with stabiiity!
I assume you were looking at old 2e video, which us a different vehicle
Only FWD
No in wheel motors
Motor under hood
91”W ai believe
https://newatlas.com/aptera-2e-specification-released/10903/
New Aotera is suppise to much better with stabiiity!
With only passengers & no cargo in the rear, the weight is favored to the front. I don’t know what the F/R ratio is, but I’d guess the front >60%.